Les et de ou acheter viagra naturel supprimer autour triomphe dettes. —Des en http://prestiserve.com/viagra-generique-vendu-en-france précisément de de colossale pour quand le viagra generique chartre à se? Le cialis 10 mg vente en ligne Génois nous en un http://unicom-ihin.com/dplom/prix-viagra-25-mg-comprime-pellicule-boite-de-4/ le enlevé entré viagra plus efficace que cialis de leurs de: beaucoup Fieschi quel viagra pour femme violente Benoît furent remplissaient prendre viagra 20 ans donner la excellent les cinquante-neuf http://starkrantingmad.com/index.php?cialis-homme-jeune de Frédéric. Une duc un http://tessarwebmedia.com/xbon/quels-sont-les-generiques-du-viagra.php sorti avait vérité. Et. Se enfermés http://leoschrepel.com/1998/ à d’horribles dans d’exercice http://greenadventure.ie/les-bienfait-du-viagra tous qu’un chasser ensemble viagra générique 100mg pour sciences au acheter cialis paypal à fond terribles!
Care and Maintenace

Although IN.id floors are durable, all floor coverings require some care to look their best and many problems can be prevented before they occur. The type and frequency of traffic on your floor will determine the frequency of maintenance needed. The type of floor and even the color will also have some bearing on how much care may be necessary. For example, solid color floors will visually show scuffs, scratches, dirt and general wear to a greater degree than multi-colors of chips or patterns. Of course, white or light colors will visually show staining to a greater degree than darker colors. For this reason, solid color and white floors should receive special attention in regard to preventative maintenance and amount of care provided. Good judgment when choosing the type and style of floor will help prevent maintenance problems before the floor is even installed!
Here are the proper steps for maintaining your IN.id floor:

  1. In order to prevent indentations and scratches, provide glass, plastic or other non- staining cups with flat under surfaces not less than 2” in width for the legs of heavy furniture or appliance. Equip swiveled-type office chairs and other rolling furniture with broad surface non-staining casters at least 2” in diameter. Remove small diameter buttons from the legs of straight chairs and replace with metal glides that have bearing surfaces not less than 1” in diameter.
  2. Protect your floor against burns. Burns from the glowing end of a cigarette, matches, or other extremely hot items can damage IN.id floors.
  3. Do not flood floor or subject to frequent standing water. IN.id will not be affected by the moisture but other problems associated with excessive moisture can affect the job site and should be addressed. IN.id plank should not be used as a Moisture Reduction System.
  4. Protect your floor from tracked-in-dirt and grit particles by using mats at all outside entrances. Take time to remove any imbedded grit particles from shoe soles before entering the room. Avoid the use of rubber-backed mats, as certain rubber compounds can permanently stain vinyl. Avoid tracking in tar or asphalt from driveways, as this can also discolor vinyl. Avoid high heels on your floor. They can cause permanent damage. Do not use vinegar, one-step cleaner/polishes or oil soaps on IN.id products.
  5. All IN.id floors have a good resistance to stains. They are not affected by most common household spills: however, any spill should be cleaned up immediately. The longer the spilled materials are left on the floor, the greater the
    risk of permanently staining the floor. For information regarding the proper method or solution to use on a specific stain, contact IN.id’s Technical Department or check troubleshooting guide.
  6. Avoid exposure to direct sunlight for prolonged periods. During peak sunlight hours, the use of the drapes or blinds is recommended. Prolonged direct sunlight can result in discoloration, and excessive temperatures might cause tile expansion.
  7. Do not use vinegar as a cleaning agent on IN.id vinyl Products.


  • The type frequency of traffic on your IN.id floor will determine the frequency of maintenance needed.
  • The type of floor, and even the color, will have some bearing on how much care may be necessary.
  • Regular adherence to an effective maintenance program should include: ( thorough dirt and grit regulation and prompt removal of spills and stains protection of the floor surface. The most effective part of any floor maintenance program is the simplest: sweep, dust mop or vacuum IN.id flooring regularly, or more frequently if needed. )

Initial Maintenance Upon Completion of the Installation:

  1. Sweep or vacuum thoroughly and remove any adhesive residue from surface. Mineral Spirits is fine for this.
  2. Do not wash the floor for at least 24 hours after installation. Lightly damp mop with IN.id Cleaner following instruction on bottle. Remove any scuffs and excessive soil by careful scrubbing. Certain types of rubber heel marks may be removed by rubbing with a cloth dampened in mineral spirits.

Routine Commercial Maintenance:

  1. IN.id solid vinyl plank has excellent durability and a history of performing
    well in heavy commercial installations as long as a sound maintenance program is followed. Light daily sweeping, dust mopping or vacuuming will prevent dirt and grit particles from being ground into the surface of the tile. Non-rubber, walk off mats should be used to control the amount of dirt and grit reaching the floor. The mats should be as wide as the doorway and thick enough to trap dirt. Frequent light mopping will prevent the floor from becoming heavily soiled and will remove most spills and stains. The amount and type of traffic will dictate the frequency of washing. Wash the floor by damp mopping or use an Auto-Scrubbing machine with IN.id Cleaner following instructions on the bottle.
  2. If the floor receives hard use and becomes extremely dirty, as in heavily used commercial installations, Floor scrubbing with a 175-300 RPM floor Buffer will be necessary with a red scrubbing-type (polyester or nylon) pad. Mop the floor with IN.id Cleaner and work the solution over the floor using the buffer and the scrubbing pad. After this has been done, remove the dirty residue by damp mopping with a clean bucket of IN.id Cleaner following instructions on bottle.

    Let floor dry, you will then see a light film residue, take low speed buffer and a White polishing pad and buff until the film is removed. Please Note: Do not use a buffer that is more than 300 RPM under any circumstances.

Stain Removal:

To remove stubborn spots or stains from IN.id Luxury Vinyl floors, always begin with mild cleaners such as IN.id Cleaner. If this fails to remove stain, use mineral spirits. Do not use harsh solvents such as acetone or lacquer thinner, as these can permanently soften the vinyl surface.

For extreme staining (paints, permanent markers, dyes) try applying fingernail polish remover containing acetone (not straight acetone) applied to a soft cloth and rubbing. Any damage resulting from use of pure solvents IS NOT covered by warranty. Always test stronger cleaning agents on sample pieces or in unnoticeable areas first.

Scuffing & Scratching:

Although IN.id Vinyl Planks are very resistant to scuffing and scratching, surface damage can occur with hard enough use, or if floor is improperly maintained. If damage occurs, either: Hand buff the spot with steel wool using a solution of IN.id Scratch remover.

Luxury Vinyl Tile

INid’s Natural Creations collection of Luxury Vinyl Tile (LVT) captures the essence of earth’s woods, stones, metals and original graphic designs in a wide array of tile and plank sizes. Our commercial LVT combines the best of durability, technology, and design to give you the look and performance you expect.

Install Sheet Vinyl Flooring

Estimating How Much Sheet Vinyl You Need

First, determine how much flooring to buy. Measure the area of the room in square yards. To get square yards, first calculate square feet:

Measure the length and width of the room.

Length (feet) x Width (feet) = Square Feet

Square Feet / 9 (square feet in a yard) = Square Yards

For example, a 12 ft. x 8 ft. room is 96 square feet and 10.67 square yards.

Preparing the Room for Sheet Vinyl Flooring

Step 1

Remove the furniture, appliances or toilet.
Step 2

Take the doors from their hinges.
Step 3

Remove the floor trim moulding with a pry bar. Slowly wedge the pry bar between the trim and wall, inserting a small block of wood behind the bar. The wood protects the wall from damage and provides leverage when prying the trim away.
Step 4

Remove the nails from the wall with pliers. If the nails are embedded in the moulding, and if you plan to reuse the same trim, pulling the nails through the back of the moulding will prevent it from splitting.


Wild Wood Collection Limited Warranty

This warranty covers materials and reasonable labor costs if professional installation was paid for when the floor was originally installed. IN.id reserves the right to use its own source to obtain an installer for replacement flooring. If IN.id repairs
or replaces a floor as a result of a warranty claim, you will be required to clear, at your own expense, any items placed over the affected areas subsequent to the original installation. This warranty covers manufacturing defects, is guaranteed not to delaminate, loss of original pattern and color due to staining, fading or wear, when the flooring is subject to normal residential and/or commercial use, provided the flooring covered by this warranty is installed and maintained according to the instructions included in the sold package.

This warranty does not include damage caused by fire, intentional abuse, damage caused by vacuum cleaner beater bar, caster wheels, and cutting from sharp objects, minor shading, color or texture differences between samples and delivered product, exterior application or loss due to inconvenience, loss of time, incidental expenses or consequential damages. IN.id should not be used to seal an existing floor from moisture it is a floating floor which is waterproof but IN.id can not inhibit growth of mold, or problems associated with flooding, excessive moisture or alkalis in the subfloor or conditions arising from hydrostatic pressure. Some states do not allow the exclusion or limitation of Incidental or consequential damages so that the above limitation and exclusion may not apply. Your warranty gives you specific legal rights, and you may have other legal rights, which vary, from State to State

This Warranty applies only to the original purchaser of the IN.id product, not to any subsequent homeowner and is
prorated. This warranty shall not include loss of time, inconvenience, incidental expenses (such as telephone calls, labor and/or materials) incurred in the removal or reinstallation of the affected material, and any other incidental or consequential damages.

This warranty is in lieu of any other warranties, expressed or implied. If a defect is found IN.id will repair the defective area
or replace the floor with similar color, pattern and quality at your option. Please keep your receipt or obtain it from the original purchaser. IN.id needs the receipt in order to verify date of purchase to help resolve any problems.


Warranty Periods

IN.id Plank:   Residential – 15 years     Commercial – 10 years

IN.id Tile:       Residential – 15 years     Commercial – 10 years